Butler Tool & Design, Inc.


Go to content

Equipment List

  • 1 SolidWorks 2016 Solid Modeling Software
  • 1 MasterCAM / IBM 3D Computer Aided Manufacturing System Ver. X9. This system is fully integrated and hardwired from the CAD stations to the CNC machining centers and CNC turning center.
  • 1 HP Designjet T520 24in HPGL2 - A Thru E Size
  • 1 Micro-Vib Vibration Spectrum Analyzer & Precision Balancing Equipment
  • 1 FARO Gage Coordinate Measuring Machine
  • 1 CNC Vertical Machining Center - 20 tool changer, travel X = 40", Y = 20", & Z = 20" capable of 3 axis simultaneous machining.
  • 1 Bridgeport Interact 412V Vertical Machining Center - 7 ½ HP spindle, 12 station tool changer capable of 3 axis simultaneous machining.
  • 1 Bridgeport / Romi CNC Lathe 8 Station turret - 10" chuck, 21 ¼" swing, 40" c/c
  • 8 Bridgeport Vertical Milling Machines - 9" X 42" table, digital readout
  • 1 Kearney & Trecker (Milwaukee) Model 3K Horizontal Mill - 15 ½" X 64" table, 10 HP.
  • 1 Cincinnati Model 2 Vertical Mill - 12" X 52 ½” table, 10 HP
  • 1 Tarnow Gap Bed Lathe - 22" swing (31 ½" with gap removed), 80" c/c, taper attachment, english and metric threading, digital readout, 3 ½" hole through the spindle
  • 1 Webb Lathe - 15" swing, 36" c/c, taper attachment 2" thru the spindle, with digital readout
  • 1 Monarch Lathe - 10” swing, 18" c/c digital readout, English and Metric threads
  • 1 South Bend Lathe - 1 4" swing, 24" c/c digital readout, English and Metric threads
  • 1 Proth Surface Grinder - wet, 10" X 20" table, hydraulic
  • 1 Harig Surface Grinder - 6" X 12" table
  • 1 American Hole Wizard Radial Arm Drill, 9" column, 36" arm
  • 1 Dumore Grinding Attachment - I.D. and O.D. capable. Installed on a dedicated lathe.
  • 1 Xermac/Ingersol ram type (sinker) EDM, with 3 axis digital read-out and pulser, 12" deep X 25" wide X 42" long tank
  • 1 Sunnen Honing Machine
  • 1 Huppert Heat Treating Furnace - 8" X 10" X 18"
  • 1 Amaco Heat Treating Furnace - 15" X 18" X 20"
  • 1 14" Drill Press
  • 1 100 Ton Hydraulic "H" frame press
  • 1 Grob Band Saw with Blade Welder, 18"
  • 1 Band Cutoff saw, 10" X 18"
  • 1 Band Cutoff saw, 6" X 12"
  • 1 Lincoln Square Wave TIG Welder, 400 amp, AC or DC
  • 1 Miller 200 amp DC MIG Welder with spot attachment
  • 1 Lincoln 225 amp AC Welder
  • 1 Oxy-Acetylene Torch
  • 1 Clark 4000 lbs. Fork Lift
  • 1 FIE Hardness Tester Model R, measuring height 8 ½", depth 5 3/16"
  • 1 48" X 48" Surface Plate
  • 1 Scherr - Tumico Optical Comparator, 14"


Misc. inspection equipment to 24"

MIL-I-45208A quality procedures

Traceable to the National Bureau of Standards

Equipment List

Home | Engineering | Special Machines | Fixtures | Dies—Stamping & Forming | Gages | Tooling | Equipment List | Testimonials | Gallery | Site Map


Back to content | Back to main menu